Skip to content

Advanced roller shutter control

MINIATURE ROLLERS SHUTTER CONTROL

The product Lante - eUNIT Mini wall actuator

iShutter

M-MVS-001-M1

Converter of monostable switches control to DC output polarity control for roller shutters

Specification

Change the polarity of the output power of the roller shutter, control the direction of rotation.

Up to 5A 30V DC cosine fi 0.8, relay.

Power supply and 12-24V DC output respectively.

Control monostable switches by connecting a standard 230V circuit.

Optical isolation of control and power circuits of roller shutters.

Size L44 x W39 x H23mm allows for mounting in fi60 boxes or other mounting enclosures.

Switch with change of directions for motors, polarized for motors, roller shutters, awnings, etc.

The product Lante - eUNIT Mini wall actuator

iShutter

M-MVS-001-M2

Converter of monostable switches control to DC output polarity control for roller shutters

Specification

Change the polarity of the output power of the roller shutter, control the direction of rotation.

H circuit MOSFET 3.5A, 12-24V.

Noiseless operation.

Overload protection.

Power supply and 12-24V DC output respectively.

Control monostable switches by connecting a standard 230V circuit.

Optical isolation of control and power circuits of roller shutters.

Size L44 x W39 x H23mm allows for mounting in fi60 boxes or other mounting enclosures.

Switch with change of directions for motors, polarized for motors, roller shutters, awnings, etc.

The product Lante - eUNIT Mini wall actuator

iShutter

M-MVS-004-M2

Separation-delay module for roller shutters, single roller shutters 230V

Specification

Separation of the control of the shutter control 230V.

Up to 5A 30V DC cosine fi 0.8, 230V/230V relays.

Power supply and 230V AC output respectively.

Direct control of 230V AC monostable switches or 230V automation.

Separation of opposing control circuits

Size L44 x W39 x H23mm allows for mounting in fi60 boxes or other mounting enclosures.

Switch with change of directions for 230V motors for motors, roller shutters, awnings, etc.

Can be mounted on DIN rail and in boxes.

Lante products - Roller shutter automation - advanced control of roller shutters with standard switches using different modes

iShutter

M-MVS-005

CENTRAL & LOCAL TIMER UNIT – Module for cooperation with traditional switches for roller shutters 110-230V

CLTU (central & local timer unit) wired controller is used to control one drive in the central control system of roller shutters, gates, awnings and blinds drives in combination with time control.

Specification

Possibility to connect a central and individual switch. Ability to operate one drive with multiple switches.

Ability to connect multiple drives in parallel and control them with one central controller.

The control can be selected as a single-pole switch, without sustaining with the option of double-clicking for sustaining, with sustaining, louvre with precise control of lamellas

Selectable hold time, 30s, 60s, 90s

Power surge protection

Protection against simultaneous switching of opposing circuits

Separation, a delay of 0.5s if there is a test of motor direction during counter-rotating motor operation.

Full enclosure to protect against accidental contact or short circuit IP40.

Switch with change of directions for 230V motors for motors, roller shutters, awnings, etc.

Can be mounted on DIN rail and in boxes.

L46.5 x W46.5 x H22.5 mm.

Lante products - Roller shutter automation - advanced control of roller shutters with standard switches using different modes

iShutter

M-MVS-006

D-S separating and delaying modules for roller shutters controlled centrally and locally 230V

Specification

Separation of the control of the shutter control 230V.

Local and central control, cascade connection possible.

Ability to provide separation for 2 shutters at once in LOCAL only mode of operation. – to be confirmed

Up to 5A 30V DC cosine fi 0.8, 230V/230V relays.

Power supply and 230V AC output respectively.

Direct control of 230V AC monostable switches or 230V automation.

Separation of control circuits.

Can be mounted on DIN rail and in boxes.

L46.5 x W46.5 x H22.5 mm

Switch with change of directions for 230V motors for motors, roller shutters, awnings, etc.

Lante product - iTouch S - a modern glass touch panel with a unique design for controlling roller shutters and gates
Product Lante - executive module for DIN rail
COMPLETE ROLLER CONTROL

INTELLI EXECUTIVE PANELS & MODULES


The unique solution offers superior control over lighting and privacy. Combined with intelligent executive modules, they provide intuitive use and a guarantee of trouble-free operation.

MORE
Call Now Button